• Gala No. 19, 2nd Floor,
    Bail Bazar, Mumbai, India
  • +91 98 6985 9610
    info@alfafans.in
Request A Quote
industrial_heavy_duty_exhaust_fans
industrial_air_blower_features_benefits_application
27
JAN
Industrial Air Blowers
  • JAN 27, 2020
  • Alfa Fans
  • BLOG

Industrial air blowers are machines whose primary function is to supply and accommodate an outsized flow of air or gas to varied parts of a building or other structure. This is achieved by rotating several blades, connected to a hub and shaft, and driven by a motor or turbine. A blower is another name for a fan that operates where the resistance to the flow is totally on the downstream side of the fan.

Alfa Fans Hi- Quality specialises in centrifugal blowers.

Alfa's Centrifugal blowers are designed to provide directional airflow by maximising static pressure, making them optimal for spot cooling and airflow through any ducting system.
It is one of the most suitable choice for helping in to distribute air flow in areas where it’s difficult to supply fresh air at constant rate. In many heavy-duty equipment applications, centrifugal blowers must perform consistently and reliably over a range of flow at or near constant pressure.

An industrial air blower is a mechanical device used for moving air or other gases in a direction at an angle to the incoming fluid. Centrifugal fans often contain a ducted housing to direct outgoing air in a specific direction or across a heat sink; such a fan which is also called a blower fan, biscuit blower or squirrel-cage fan (because it's sort of a hamster wheel). These fans increase the speed and volume of an air stream with the rotating impellers.

Centrifugal fans use the kinetic energy of the impellers to extend the quantity of the air stream, which successively moves against the resistance caused by ducts, dampers and other components. Centrifugal fans displace air radially, changing the direction (typically by 90°) of the airflow. They are sturdy, quiet, reliable, and capable of operating over a good range of conditions.

Centrifugal fans are constant-displacement or constant-volume devices, meaning that, at a continuing fan speed, a centrifugal fan moves a comparatively constant volume of air instead of a continuing mass. This means that the air velocity during a system is fixed albeit the mass flow through the fan isn’t.

Centrifugal fans aren't positive-displacement devices and centrifugal fans have certain advantages and drawbacks when contrasted with positive-displacement blowers: centrifugal fans are more efficient, whereas positive-displacement blowers may have a lower capital cost.

The industrial air blower features a drum shape composed of variety of fan blades mounted around a hub.

The functioning of the centrifugal air blower: The hub turns on a driveshaft mounted in bearings in the fan housing. The gas enters from the side of the fan wheel, turns 90 degrees and accelerates thanks to force because it flows over the fan blades and exits the fan housing.

The centrifugal fan uses the centrifugal power supplied from the rotation of impellers to extend the kinetic energy of air/gases. When the impellers rotate, the gas particles near the impellers are thrown far away from the impellers, then enter the fan casing. As a result, the kinetic energy of gas is measured as pressure due to the system resistance offered by the casing and duct. The gas is then guided to the exit via outlet ducts. After the gas is thrown-off, the pressure within the middle region of the impellers decreases. The gas from the impeller eye rushes in to normalize this. This cycle repeats and thus the gas is often continuously transferred.



Features:
Industrial air blowers are light weight designed with professional impeller which uses high pressure to give larger flow and makes less noise and has long lasting life. With its Special air-flow-adjust designs it offers stable flows and easy control.

It is one of the most suitable choice for helping in to distribute air flow in areas where it’s difficult to supply fresh air at constant rate. In many heavy-duty equipment applications, centrifugal blowers perform consistently and reliably over a range of flow at or near constant pressure.



Benefits:
Since centrifugal blowers operate at high impeller speeds, they're useful in industrial applications to maneuver bulk volumes of air at low-to-medium static pressures in radial direction.

The various blade configurations of centrifugal blowers allow them to work in wider range of environments and in diverse airflow/pressure conditions.

Centrifugal blowers can develop more pressure at a given rotational speed in comparison to other sort of blowers at an equivalent rotational speed.

Since centrifugal blowers have high horsepower capability than the other blowers, there will be less overloading and possible damages to motor.

As centrifugal blowers are available in multiple sizes & blade arrangements, they will be more sensible choice for places where space may be a premium.



Industrial applications:
Industrial air blowers are widely utilized in industrial applications where there's a requirement for constant flow of larger volumes of air like in ventilation, combustion, transporting materials, cooling and heating systems, dust control, air conveyor systems, industrial vacuum applications and in other industrial processes. The industries during which air blowers function include electric power production, pollution control, metal manufacturing and processing, cement production, mining, petrochemical, food processing, cryogenics, and clean rooms.

At Alfa, Industrial Air Blowers are available in various sizes 1/4 hp to 150 hp, their Air Handling capacities varies from 100 MCH to 150000 MCH.






This is certify That Exhaust fans for our Boiler & Burner area supplied by Alfa Fans Mumbai is commissioned & performing satisfactorily.

-Bhushan Steel




Shares

Leave a Reply